FTC_STATUS
|
I2C_GetClock
|
(DWORD dwClockDivisor, LPDWORD lpdwClockFrequencyHz)
|
Parameters
dwClockDivisor
|
Specifies a clock divisor which will be used to calculate the frequency for clocking data in and out of the FT2232C device.
|
lpdwClockFrequencyHz
|
Pointer to a variable of type DWORD which receives the actual frequency in Hz that data will be clocked in and out of the FT2232C device at.
|
Return Value
FTC_SUCCESS if successful, otherwise the return value is one of the following FTC error codes:
FTC_INVALID_CLOCK_DIVISOR
Remarks
The valid range for dwClockDivisor is 0 to 65535. The highest clock frequency is represented by 0 which is equivalent to 6MHz and the lowest clock frequency is represented by 65535 which is equivalent to 91Hz. This can be calculated using the following formula:
dwClockFrequency = 12MHz / ((1 + dwClockDivisor) * 2)
The clock frequency can be set by passing the clock divisor value to I2C_SetClock or I2C_InitDevice.
Example
FTC_STATUS Status = FTC_SUCCESS;
DWORD dwClockDivisor = 0;
DWORD dwClockFrequencyHz = 0;
Status = I2C_GetClock(dwClockDivisor, &dwClockFrequencyHz);